ASKER Durometer Type C1L

Sản phẩm đã bao gồm VAT
1353
Cần tư vấn thêm? Hotline/Zalo: 0905 412 411 - 0938 861 947
Giá cạnh tranh
Hàng chính hãng 100%
Giao hàng nhanh
Widely used for measuring soft rubber, sponges, and other foam elastomers, as well as rolled-threads, -films and textile windings (yarn packages).
THÔNG TIN CHI TIẾT

ASKER Durometer Type C1L

Features

Indentor

img

Height: 2.54mm Shape: Spherical

Hardness Tester Selection Chart

img

Our product line consists of various types of durometers applicable to specific materials as indicated in the chart above.



Type A Durometer (ASKER A type), conforming to JIS K 6235 is the most popular type of durometer for measuring rubber hardness.



However, verification is recommended because a significant difference is estimated to be the largest when a durometer indicates measurement values from 10 to 90 points.



For hard specimens for which Type A Durometer readings indicate more than 90 points, measurements should be undertaken using the Type D Durometer (ASKER D type). However, for soft specimens with measurements of less than 20 points, the ASKER C type or Type E Durometer (ASKER E type) should be used. The most important consideration in using durometers is to select the correct type for purposes of measurement according to the specimen.

Specification

Standards
  • JIS K 7312
  • JIS S 6050
Indication range
0 point – 100 point (262 degree dial scale)
Minimum indication
1 point (Accuracy : ±1 point)
Indentor Design (mm)
Height: 2.54 5.08 Dia. Spherical
Spring Forces [mN(g)]
0 point:
539(55)
100 point:
8379(855)
Central hole of diameter of Pressure foot
Φ5.5
Pressure foot Dimension (mm)
f16 Longer foot type Length: 18
Outer Dimension (mm)
Approx. Width 57×Depth 30×Height 94
Weight (g)
200
Application
soft rubber, urethane foam, sponge, rolled-threads, film rolls and pottery clay, footwear

Outer Dimension (mm)

img

A custom designed pressure foot durometer is available according to specimen conditions.